B meters IWM-TX5, Руководство пользователя

Страница: 3 / 10

IWM-TX5
3
User Manual v1.2
SAFETY INSTRUCTIONS
Warning: this symbol highlights the instructions to be strictly followed for the correct functioning
of the radio module.
Danger: Items marked with this symbol contain information that must be followed carefully to
avoid dangerous situations.
Notes: the notes indicated by this symbol contain suggestions to keep in mind when using the radio
module.
Read all the instructions carefully before proceeding with the installation! Failure to comply with
one or more procedures contained in the manual can be dangerous and cause damage to things
and people.
It is recommended to comply with all applicable safety and accident prevention laws.
Follow nationwide regulations regarding water measurement.
Follow the technical requirements relating to the installation of electrical equipment.
The instrument complies with the requirements of the European Council Directive 2014/30/
EU on electromagnetic compatibility, the Directive 2014/35/EU on electrical safety and the RED
Directive 2014/53/EU.
The warranty and correct functioning are void if the identification plate and seals applied to the
instrument are removed or damaged.
It is forbidden to transport instruments with an active radio interface by air.
To clean the instrument externally, use a soft cloth moistened with water. Do not wash with high
pressure jets or immerse the device in water. Avoid contact with oils and solvent. Do not use
alcohol or detergents.
Remove the instrument from the packaging only at the time of installation to protect it from
damage and dirt.
If multiple instruments are installed in a unit, the installation conditions must be the same for all
instruments in order to ensure the most equitable billing of consumption possible.
Carefully observe the instructions in the data sheet, instruction manual, application notes
and lid. Failure to comply with the operating conditions may lead to situations of danger and
forfeiture of all claims for liability for defects as well as liability based on any warranty.
For more information visit www.bmeters.com .
Dispose of replaced instruments and defective components in accordance with the
environmental regulations in force.