2
15
Table of Content
Technical Specifications
Output Power
200 Watt / 8 Ohm, 380 Watt / 4 Ohm
Frequency Response 20Hz – 20kHz, 1W (DIGM Mode)
-0.08dB
Bandwidth 1W / -3dB (DIGM Mode)
2Hz – 180kHz
Signal/Noise in Power-Amplifier-Mode (rel. Pmax)
101dB
The following Signal/Noise Ration can be achieved in DIGM Mode only
Signal/Noise at DIGM 57 (relative to Pmax)
110dB
Signal/Noise at DIGM 40 (relative to Pmax)
125dB
Signal/Noise at DIGM 40 (relative to 1W)
105dB
THD+N at 1 Watt, 1kHz
0.01%
THD+N from 50mW to 50W, 1kHz
under 0.02%
THD+N under 0,1%
from 0.3 mW to 150 Watt
Damping Factor (8 Ohm, 10W)
250
Inputs balanced
Balanced XLR & Balanced Current Injection XLR-CI
Input unbalanced
Unbalanced RCA
Input Impedance
50kOhm to ground, 100kOhm differential at XLR,
Input Impedance, CI Current Injection Input
1.5kOhm serial at XLR-CI
Input Sensivity
max. 750mV/RCA, 1.5V/XLR
Volume Adjustment (with external DIGM Control)
DIGM in 66 precise 1dB increments
Speaker Output
1 Stereo-Pair with gold plated binding posts
AC Voltage
AC 100V, 115V or 230V, 50/60 Hz
Power Consumption
110W – 800W
Dimensions Enclosure (W x D x H)
435 × 405 × 138 mm
Dimensions incl. Legs, Knobs and Terminals
435 × 450 × 150 mm
Weight
40kg
Note: T echnical specifications and design are subject to change without notification. All specifications
without warranty.
Introduction
Front Panel Functions
Rear Panel Functions
Traditional Power Amplifier Mode
DIGM Mode
Possible Maloperations
Troubleshooting, Maintainance, Service
Important Safety Information
General Safety Precautions
CE / FCC declaration, Recycling
System Remote Control
Volume, Power and dB
Technical Specifications, Content of
Packing
Quick Start Guide
3
4
5
6
7
8
9
10
11
12
13
14
15
Content of Packing
Ÿ
Amplifier M2
Ÿ
Power Cable
Ÿ
Optical DIGM Waveguide
Ÿ
Owner's Manual
Please keep the packing for eventual later transportation.