B+K precision 2165A Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 28

B+K precision 2165A Скачать руководство пользователя страница 24

24

Service Information

Warranty Service:

Please go the support and service section on our websit in the original packaging with proof of purchase to the address below. Clearly state on the RMA the performance problem and return any
leads, probes, connectors and accessories that you are using with the device.

Non-Warranty Service:

Please go the support and service section on our websit product in the original packaging to the address below. Clearly state on the RMA the performance problem and return any leads, probes,
connectors and accessories that you are using with the device. Customers not on an open account must include payment in the form of a
money order or credit card. For the most current repair charges please refer to the service and support section on our website.

Return all merchandise to B&K Precision Corp. with pre-paid shipping. The flat-rate repair charge for Non-Warranty Service does not
include return shipping. Return shipping to locations in North America is included for Warranty Service. For overnight shipments and non-
North American shipping fees please contact B&K Precision Corp.

B&K Precision Corp.

22820 Savi Ranch Parkway

Yorba Linda, CA 92887

www.bkprecision.com

714-921-9095

Include with the returned instrument your complete return shipping address, contact name, phone number and description of
problem.

«
...
22
23
24
25
26
...
»

Содержание 2165A





























Отзывы:

Нет отзывов