Light
Touch
to switch on the Light.
Use
to adjust the Level (1-10) of the brightness.
Second touch
is started automatically color changing mode.
Use
to select 6 different colors.
Third touch
to switch off the Light.
Setting the Sunset Time
Touch
to switch on/off the sunset mode.
The sunset symbol appears or disappears on the display
Hold the
button for 3 sec. to set and the hours indication
starts to blink.
For setting hours touch
to adjust and touch
to confirm
it. For setting minutes touch
to adjust and touch
to
confirm it.
If the indication stopped, touch
to start again.
Sunset light simulation
30 min before the set time the light is started with 100% and the brightness is lowered slowly until it is switched off. During this
time you can press the button
for 3 seconds to switch off the light prematurely.
Sunrise light simulation
30 min before wake up time, light sunrise is started gradually to increase its brightness. At alarm time the choosed wake-up-
sound will be played for 5 minutes. During sound playing you may: 1 Touch
the sound is stopped and in 5 min it will be
played for 5 minutes again. Press or touch any buttons except
to stop the sound. 2 Hold 3 sec
to switch off wake up
light.
Wake-up sound
Press the
button to
adjust the alarm sound.
Touch
to select 1-7
sounds and touch
to
confirm it.
Choices 1-6 are nature
sounds and wake-up tones.
Choice 7 is the last listened
radio station.
Press the
button on the
backside to choose volume
levels 00 -15.
Hold the
button for 3
sec.
The hours indication starts
to blink.
For setting hours touch
to adjust and touch
to confirm it.
For setting minutes touch
to adjust and touch
to confirm it.
If the indication stopped,
touch
to start again.
Setting the alarm wake-up
time
Touch the
button
repeatedly to switch the
alarm mode ON or OFF.
The bell symbol appears or
disappears on the display
Radio FM
Touch the
button to turn
the radio ON or OFF
Hold the
button for 3
sec. All available FM
channels will be scanned
and saved automatically.
Touch the
buttons to
select the FM station.
Press the
button on the
backside to choose volume
levels 00 -15.
Intensity of the display
Press the
button
repeatedly on the backside
Changing current time
Touch
and the hours
indication starts to blink.
For setting hours touch
to adjust and touch
to confirm it.
For setting minutes touch
to adjust and touch
to confirm it.
If the indication stopped,
touch
to start again.
Switch between 12h and
24h display
Press the
button
repeatedly on the backside
12h
AM or PM appears on the
display
Setting current time
When the USB plug is
connected, the hours
indication starts to blink.
For setting hours touch
to adjust and touch
to confirm it.
For setting minutes touch
to adjust and touch
to confirm it.
If the indication stopped,
touch
to start again.
If only batteries are used, the product
functions are limited:
* The time display is switched off after
15 sec. Press one of the buttons on the
rear panel to turn it on.
* When the alarm time is set, the
sound is played for 2 minutes.
The snooze button is available.
Press or touch any key other than the
Snooze key to stop the sound.
* All light functions are not available.
* Radio is available.
General safety instructions
* Don´t press two or more keys at the same time.
* To avoid malfunctions, the distance of each touch should be more than 1 second
* If there is any malfunction, please unplug the unit for 3 seconds.
* Please storage in dry place and take off batteries if not use for a long time.
Features
* LED time display in 12h or 24h format
* Sunrise wake up light simulation
* Sunset light
* 5 Nature sounds as alarm sounds
* Bedside lamp: White light flux: 73lm
* 10 levels of the brightness
* Dynamic color change of the different light colors
* Radio FM + antenna
* 15 volume levels
* Sensor touch buttons
* Power supply: DC 5V; USB cable; 2xAAA batteries
Please note: The time display is not displayed when the
radio is switched on. When the radio is switched on, you
will see the frequency of the current radio station. You can
press FM to display the current time and then press FM
again to continue listening to the radio.
Safety directions / Please read this information carefully before
installing or using this product. Please keep this user manual for
further reference.
1. The manufacturer does not accept any responsibility for injuries or
damage resulting from improper use of the light.
2. The lights have a protection class rating of
“IP20“
and are solely
intended for use in interior areas of private households.
3.
The symbol of the crossed-out garbage can on the product or the
packaging means that the product must not be disposed with ordinary
household waste. At the end of its useful life, the product must be
returned to a point of acceptance for the recycling of electric and
electronic device. Please ask your local municipality for the point of
acceptance.
4. Please make sure that no cables get damaged during the installation
work.
5. The light source of this lamp is not replaceable. If the light source has
reached the end of its operational life, the entire lamp must be replaced.
6. This lamp is not suitable for dimmers and electronic switches.
7. Place the lamp on horizontal surfaces only.
8. LED colour deviation when using different chargers may occur. The light
colour and luminous strength of the LED's can also change as a result
of battery life span level.
9. Batteries or rechargeable batteries are not permitted in domestic waste.
They must be decontaminated according to the regulations of the
responsible authorities as hazardous waste. Use the available collection
points.
BKL1082
User manual
REV 01 / 11-2017
contact:
Intensity of display
USB 5V
Wire antenna
Battery
compartment
12h / 24h format
Volume
Nature sounds
FM
Sunset
Up
Down
Light
Alarm
Current time
Snooze
LED-Display
LED-Light
Use the included USB
cable to connect the
light alarm clock to a
computer.
Use a transformer with
a USB port to connect
to a power supply.
Use batteries as a backup power source. When the light alarm is disconnected from
the power source (USB), the inserted batteries store all your settings.
To install the batteries:
Use 2 batteries type AAA (not included). Open the battery compartment in the
direction of the arrow. Insert 2 AAA batteries (observe polarity) and reinstall the
battery compartment cover.
Low
High
Off
