2
1:4
1.
0.5
0.25
Futura Book 24Pt
1
LUXOMAT
®
RC-plus next
1:4
1.
0.5
0.25
Futura Book 24Pt
1:4
1.
0.5
0.25
Futur
a Bo
ok 24Pt
1:4
1.
0.5
0.25
Futur
a B
o
ok 24P
t
1
2
3
1
3
2
4
TEST
16
12
8
4
15s 30s
1
1,5 2 3 5 6 7 10
+
-
1
2
1:4
1.
0.5
0.25
Futura Book 24Pt
180°
10°
1
2
45°
1
2
max min
1
2
3
1:4
1.
0.5
0.25
Futur
a Bo
ok 24Pt
> 1m
4
1
2
2.5m
21m
8m
3m
1m
2.5m
21m
8m
1m
2.5m
21m
8m
1m
3m
21m
8m
1m
3m
21m
21m
21m
21m
8m
1m
3m
21m
8m
1m
3m
2.5m
21m
8m
3m
1m
2.5m
21m
8m
1m
2.5m
21m
8m
1m
3m
21m
8m
1m
3m
21m
21m
21m
21m
8m
1m
3m
21m
8m
1m
3m
2
3
1
2.5m
21m
8m
3m
1m
2.5m
21m
8m
1m
2.5m
21m
8m
1m
3m
21m
8m
1m
3m
21m
21m
21m
21m
8m
1m
3m
21m
8m
1m
3m
130°
230°
280°
1:4
1.
0.5
0.25
Futura Book 24Pt
4
11
10
7
8
9
5
3
2
1) Push in cover-up clips on marked place
(blind out distant range/close-up range/
both)
2) Cover-up stickers
Operating and mounting instructions for motion detector LUXOMAT
®
RC-plus next
1)
Caution: have all work involving the 230 V
mains supply carried out by a qualified
electrician! Before starting disconnect the
mains! Please be aware, that the LUXOMAT
®
RC-plus next is not suitable as an intrusion
detector, since it is not equipped with a
tamper contact.
2) Socket base corner mounting
3) In the case of mounting over the previous
socket “RC-plus” use the extra cover that is
provided.
1) Wall mounting
2) Ceiling mounting
3) Outside corner mountable with plug-in
socket (included with the RC-plus
next
280,
see point 20)
1) Connection cable from top down
2) Connection cable from below
3) Connection cable from behind
4) Terminal markings
(Wiring diagrams see point 17)
1) Press here for separation of terminal case
and plug-in socket
2) Mount the plug-in socket with two screws
and the enclosed seal rings on a firm base
(Pay attention to inserting of the connection
cable, see point 4)
3) Imprint the terminal case on plug-in socket.
The terminal case on the plug-in socket is
rotatable upto 10° for fine adjustment of the
motion detector.
Mechanical range adjustment
+
: e.g. 21m,
–
: e.g. 5m (mounting height 2.50 m)
mounting height min. = 2.00 m
(RC-plus
next
130: 1 zone; RC-plus
next
230:
2 zones; RC-plus
next
280: 3 zones, see point 8)
Follow-up time
Test operation, 15 sec. ... 16 min., Pulse operation
(Test operation: range testing, detector switches
on/off the lighting at any recognized movement)
Lux value
Night operation...Dusk...Day operation
(Day operation: light sensor inactive, switching at
any brightness value)
On delivery the potentiometers are adjusted in
position “TEST” and “SUN” symbol (daytime
operation). With this adjustments the following
regular values are active:
Follow-up accommodation: 3 min.
Lux value: approx. 20 Lux
Reset:
The adjusting into “Factory settings” from
any other position causes a “Reset” of the device.
That means all parameters are resetted into factory
settings (fast LED-flashing).
LED Functional display
Display of movements and operating states
(Switchable with remote control
LUXOMAT
®
IR-RC,
see point 11)
1) If possible mount unit on a safe place
(wall or ceiling mount).
2) Influence of weather reduces the lifetime of
the unit. Please take care to mount correctly.
3) Minimum distance to switched lighting,
frontally or laterally to device: 1m
4) Never mount the connected lights below the
motion detector!
1)
LUXOMAT
®
IR-RC (accessory, see point 20)
2)
LUXOMAT
®
IR-RC-Mini (accessory, see
point 20)
Caution:
Settings with remote control subscribe
the settings by courtesy of potentiometers (see
point 5 ) (for description see point 12).
1) Remove the coverring with slightly pressure
2) Adjust Range, follow-up accommodation and Lux value with screwdriver
1) Range walking across: approx. 21m
2) Range walking towards: approx. 7 - 8 m
3) Anti-creep: approx. 1 - 3 m
1) Change range or sensitivity adjustments
by swivelling of the sensor head vertically
or horizontally (Sensor head horizontally =
max. range)
2) Fine adjustment of sensor axis
Mechanical range adjustment possible
for every zone separately (see point 5)
Self test cycle
After mounting and connecting the 230 VAC supply
voltage, the LED flashed for 1min. to show a self testing
unit. Then the unit is ready for operation and the set-
tings can be made manually or with remote control
(see point 11).
6
&
“TEST”
TEST
16
12
8
4
15s 30s
1
1,5 2 3 5 6 7 10
3
GB
1. Mounting preparations
2. Mounting types
4. Inserting of the connection cable
3. Plug-in socket
5. Putting into operation / Settings
9. Exclude sources of interference
8. Sensitivity adjustment (mounting height 2.50 m);
mounting height min. = 2.00 m
(Sensor head justified horizontally, see point 7)
7. Sensor head optics
6. Factory settings
10. Mounting place
11. Settings of remote control
3
2
1
10°
