Test operation
Switches the light ON/OFF when
movement is detected.
Unlocking device
Lux value: Day operation
light sensor inactive, switching
at any brightness value
Lux value: approx. 100 Lux
Onset of dusk
Lux value: approx. 25 Lux
Advanced dusk
Lux value: approx. 2 Lux
Darkness
Automatic reading in the
current light value
Individual light value
2 - 2500 Lux
Impulsfunction
1)
1sec. ON, 9 sec. OFF
Follow-up time
15 sec. upto 16 min.
Vacation- and comfort function
Switching ON/OFF
On: By achieving the Lux value
1 hour daylight independent
of mouvements, then normal
operation (switching time
changeable, see point 15)
Alarm function
Switching ON/OFF,
(ON for 30 sec., OFF for
1sec., then normal operation)
Walk test
Switching ON/OFF
Anti-creep protection
Switching ON/OFF
Sensitivity adjustment
~ +15 %, ~ –30 %
Light OFF
Switches the light ON again when
movement is detected.
Reset
Erasing of all of the values set
using the remote control.
(Then potentiometer-settings
activ, see point 5.)
Light ON for 12 h / Light OFF for 12 h
By pressing once the party button, the
light is switched on for a period of 12
hours. By pressing the party button
twice, the light remains switche off until
the next evening (see point 14).
Double Locking (sabotage protection)
Locking of IR-RC-reception. After lock-
ing the device press “Locking” again
during a period of 5 sec. (reset see
point 6)
Reset
Light OFF, then automatic mode
Light ON for 12 h / Light OFF for 12 h
By pressing once the party button, the
light is switched on for a period of 12
hours. By pressing the party button
twice, the light remains switched off
until the next evening (see point 14).
Power supply:
230 V~ +6 % -10 %
Rated capacity:
16 A relay
Switching power:
3000 W (13 A, 250 V, cos(
ϕ
)= 1)
1500 VA (6.5 A, 250 V, cos(
ϕ
)= 0.5)
Range
: approx. 20 m
Time settings:
Impuls, 15 sec. - 16 min.
Follow-up accommodation:
active with factory
settings and with programming of remote con-
trol
LUXOMAT
®
IR-RC (15 sec. - 16 min.)
Photo electric switch:
approx. 2 - 2500 Lux
Factory settings
: follow-up accommodation
3 min., photo electric switch approx. 20 Lux
Detection area:
130° / 230° / 280°,
360° anti-creep protection
Degree of protection/class:
IP54 / II
Dimensions
: L 121 x W 71 x H 85 mm
Material
: UV-stabilised Polycarbonate
Colours
: white / black / brown / silver (only
RC-plus
next
230)
Mounting types:
wall and ceiling mounting, RC-
plus
next
280: outside corner mountable with
inclused plug-in socket
Inserting of the connection cable
: once or twice
from top down, from below and from behind
Range adjustment:
> selective mechanical adjustment for every
zone in the 130°, 230° and 280° unit
> swivelling of the sensor head: vertically –10
upto +45°, horizo – 90°, laterally ±10°
> elec15 % up to 30 % with remote
control
LUXOMAT
®
IR-RC
> With blank out clips (included)
Electrical adjustments:
in traditional manner
with potentiometers valid for time and Lux value
only, with infrared remote control.
LED-Display:
one LED per detection zone
Lock device
Reset
Light OFF, then automatic mode
Caution:
The infrared receiver of the
RC-plus
next
is positioned in the anti-
creep protection. For best reception
target anti-creep with remote control.
Because of the sabotage protection the function
“Light off” is deactivated in the factory. When
required it must be activated again:
1. Mains to be disconnected
2. Mains to be connected - a self test cycle
of 60 sec. starts (the LED is flashing, see
point 5).
3. Activation/deactivation of the function “Light
Off” can be done only during the self testing
cycle
For activation of the function “Light OFF”
the button “Light OFF” must be pressed
during the self testing cycle (the LED will
flash quickly).
For deactivation “Light OFF” the button
“Reset” must be pressed during the self
testing cycle (the LED will flash slowly).
Caution:
The implementation of “Reset” with po-
tentiometers (see point 6) or with remote control
(see point 12) does not influence the activation/
deactivation of the function “Light OFF”
The energy saving and comfort by courtesy of
follow-up accommodation of the motion detector
RC-plus
next
is unique. That means: If the last
detected movement is located in the anti-creep
zone (for instance mounting over a doorway),
the follow-up accomodation will be reduced to
1/4 of the original time = energy saving.
f.ex.: adjusted follow-up accommodation = 16 min.
a) Walking towards unit: effective follow-up
accommodation = 4 min.
b) Removing from unit: effective follow-up
accommodation = 16 min.
Caution:
The “dynamic follow-up accommoda-
tion“ will be activeted or deactivated on follow-
ing conditions:
Follow-up accommodation “active”:
> Unit is located in “factory settings“
(see point 6)
> Settings of follow-up accommodation with
remote control values 15 sec. - 16 min.
(see point 12)
Follow-up accommodation “inactive”:
> Settings of follow-up accommodation with
potentiometers values 15 sec. - 16 min.
(see point 5)
1)
As soon as the function “Chime/Impulse”
is activated, the following functions will
be blocked: Alarm function, Light ON for
12 hrs / Light OFF for 12 hrs, Vacation- and
comfort function
The duration of the on-period can be adjusted:
1. “Unlock” unit with remote control
2. The button “Co“ to be operated. The LED
flashes for 10 sec.
3. During these 10 seconds the duration of the
light-on period can be selected: from e.g.
15 sec. = 15 min. up to 16 min. = 16 hrs
4. The unit to be locked with the button “Lock”.
5. “Vacancy/Comfort” is activ now (deactivati-
on see point 12)
Caution:
If the “Vacation- and comfort function”
is active or with lower deviation of the Lux value
the RC-plus
next
turns on the light again after a
time delay of 60 sec.
LUXOMAT
®
Motion detector:
RC-plus
next
130
white:
97001
brown:
97011
black:
97021
RC-plus
next
230
white:
97002
brown:
97012
black:
97022
silver:
97042
RC-plus
next
280
white:
97003
brown:
97013
black:
97023
LUXOMAT
®
Remote control:
IR-RC (incl. wall bracket)
92000
IR-RC-Mini
92090
LUXOMAT
®
Socket base for corner mounting:
RC-plus
next
ES
white:
97004
RC-plus
next
ES
brown:
97014
RC-plus
next
ES
black:
97024
RC-plus
next
ES
silver:
97043
(With
LUXOMAT
®
RC-plus
next
280 included)
Accessory:
Arc extinction kit
10880
Wall bracket for IR-RC as replacement 92100
Standard operation
(with optional arc extinctions kit)
Optional extension for switching of parallel
inductors, rocker switches, fluorescent lamps etc.
L N L’
RC
Terminal connection for parallel operation
We recommend max. 5 motion detectors.
L N L’
L N L’
Permanent light operation with external push
button
Additionally manuel switching is possible. The
NC-contact is to press for approx. 0.5 - 2 sec.
L N L’
Permanent light operation with external switch
Switching is manually possible (permanent light
operation). Caution: Light has to switched off
manually.
L N L’
M
A
N 5
51
7
– 0
91
20
9-
3
B.E
.G
.
120
120
70
70
70
63
63
46
63
57
27
57
27
RC-plus next 230°
RC-plus next
B.E
.G
.
120
120
70
70
70
63
63
46
63
57
27
57
27
RC-plus next 230°
RC-plus next
12. Functions of LUXOMAT
®
IR-RC
19. Technical data
17. Wiring diagrams
14. Activation “Light OFF”
13. Functions of LUXOMAT
®
IR-RC-Mini
18. Dimensions (mm)
15. Vacation- and comfort function
16. Follow-up time savings
20. Article / Part nr. / Accessory
