13
DIAMOND3
®
350 RS SERIES
GB
NOTE: As our engineers are
constantly conducting research
and development on our machin-
ery to develop quality products
for the marketplace, our product
model(s) can be changed without
notice.
CONTENTS
General Power Tool Safety Warnings . .13
Special Tools Safety Warnings . . . . . .15
Technical data . . . . . . . . . . . . . . . . .16
Safety guidelines . . . . . . . . . . . . . . .16
Introduction . . . . . . . . . . . . . . . . . . .16
Electricity and Safety . . . . . . . . . . . . .16
Characteristics . . . . . . . . . . . . . . . . .17
Unpacking and Set up . . . . . . . . . . . .17
Various sawing processes . . . . . . . . . .19
Safety . . . . . . . . . . . . . . . . . . . . .19
Maintenance . . . . . . . . . . . . . . . . . .19
Environmental protection . . . . . . . . . .20
Troubleshooting . . . . . . . . . . . . . . . .20
Declaration of Conformity . . . . . . . . .21
Spare parts . . . . . . . . . . . . . . . . . . .22
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings
and instructions may result in
electric shock, fire and/or seri-
ous injury.
NOTE: Save all warnings and
instructions for future reference.
The term ‘power tool’ in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool .
1) Work area safety
a)
Keep work area clean and well
lit.
Cluttered or dark areas invite
accidents .
b)
Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
Power tools create sparks
which may ignite the dust or fumes .
c)
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control .
2) Electrical safety
a)
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock .
b)
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded .
c)
Do not expose power tools to rain
or wet conditions.
Water entering a
power tool will increase the risk of
electric shock .
d)
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges and
moving parts.
Damaged or entangled
cords increase the risk of electric shock .
e)
When operating a power tool
outdoors, use an extension cord
suitable for outdoor use.
Use of a cord
suitable for outdoor use reduces the
risk of electric shock .
