B. Braun 871 5416, Руководство по обслуживанию

Страница: 71 / 86

Procedural Instructions on the TSC
8
Infusomat® fmS 2.3 gb 8 - 3
Functional Inspection Switch on Unit
1. Switch on unit and check the following details:
- Self-test
- Audible alarm
One short and afterwards two short tones
- Status displays
LEDs (red, green) light up for a short moment
- LCD lighting
- Display on the LC display
All symbols and display pixels flash for a short moment
Fig.: 8 - 2 . Then „000.0ml/h“ is displayed
Operation
1. Open door.
Pump cover must automatically open when the unit door is
opened.
2. Insert the Original Infusomat Line (OIL). If the unit is designed
for an Infusomat® Space Line, then insert an Infusomat®
Space Line.
3. Close door.
The door must lock smoothly and close correctly at the top
and bottom.
4. Carry out infusion with intermediate bolus and press all but-
tons at least once.
Infusion and bolus are performed and all buttons trigger the
function desired.
5. Plug MFC service connector on the MFC socket.
6. Trigger a staff call (e.g. open pump cover during operation).
The red LED in the MFC service connector lights up.
- if ”dynamic” is set, 1 sec.
- if ”static” is set, until the alarm is acknowledged.
Check the MFC staff call line if installed.
7. Press the alarm button.
The current alarm is suppressed for 2 minutes.
Fig.: 8 - 2