background image

2

3

Make sure that the amplifier or mixer volume is OFF and the EQ 
tone controls are at flat or off. Plug a guitar cable into the output 
jack of the guitar and into the input of the amplifier or mixer.

Turn the volume control of the A3T half way up (half way be-
tween “0” and “+12”). Turn the volume of the amplifier or mixer 
up enough to get a good level of sound. Refer to the amplifier 
or mixer instructions on how to set up best gain structure with 
an instrument for the cleanest possible sound.

Once the desired volume level is found use the EQ on the A3T 
preamp to find your tone.

Try  turning  the  MIDDLE  CONTROL  down  a  little  to  cut  this 
tone.  This  will  bring  some  smoothness  to  the  sound.  Turn  up 
the BASS control some to add fullness to the sound. Use the 
PRESENCE control to brighten the sound. Experiment and find 
a tone that suits your taste.

Use the EQ tone controls at the amplifier or mixer to fine-tune 
the tone. 

Good luck and turn it UP!

B-BAND LIMITED WARRANTY STATEMENT

In the unlikely event that your product needs guarantee service, 
please contact your dealer, distributor or manufacturer. To avoid 
any unnecessary inconvenience on your part, we recommend 
you read this instruction manual carefully before seeking guar-
antee service.

YOUR GUARANTEE

By this Guarantee, B-Band guarantees the product to be free 
from defects in materials and workmanship at the date of origi-
nal purchase for a period of one (1) year from that date.

If within the guarantee period the product is determined to be 
defective (at the date of original purchase) due to improper ma-

terials or workmanship, B-Band will, without charge for labor or 
parts, repair or (at B-Band’s discretion) replace the product or 
its defective parts subject to the terms and limitations below. 
B-Band  may  replace  defective  products  or  parts  with  new  or 
refurbished products or parts. All products and parts replaced 
become the property of B-Band.

TERMS

1. Guarantee services will be provided only if the original invoice 
or sales receipt (indicating the date of purchase, model name 
and  dealer’s  name)  is  presented  with  the  defective  product 
within the guarantee period. B-Band may refuse free-of-charge 
guarantee service if these documents are not presented or if 
they are incomplete or illegible. This Guarantee will not apply 
if the model name or serial number on the product has been 
altered, deleted, removed or made illegible.

2. This Guarantee does not cover transport costs and risks as-
sociated with transport of your product to and from B-Band.

3. This guarantee does not cover:
a) periodic maintenance and repair or parts replacement due 
to wear and tear.
b) consumables (components that are expected to require peri-
odic replacement during the lifetime of a product)
c) damage or defects caused by use, operation or treatment of 
the product inconsistent with normal use
d) damage or changes to the product as a result of:
  1. misuse, including:
  - treatment resulting in physical, cosmetic or surface 
  damage or changes to the product
  - failure to install or use the product for its normal purpose 
  or in accordance with B-Band’s instructions on installation  
  or use
  - failure to maintain the product in accordance with 
  B-Band’s instructions on proper maintenance
  - installation or use of the product in a manner inconsist-
  ent with the technical or safety laws or standards in the 
  country where it is installed or used
  2. the condition of or defects in systems with which the 
  product is used or incorporated except other B-Band’s 

Содержание UST

















Отзывы: