0
5. The loose lead wire of the mic should be at-
tached to the drum shell by using double-sided
tape (not supplied).
6. Open UKKO preamp.
7. Take the longer of the 2 pcs bolts and check that
it fits to the air hole. It may be that at the air hole
there is a decorative rivet or screw metal piece.
If this metal piece does not allow the screw to fit,
then consider removing the metal piece or mount-
ing the preamp at the rim.
8. Next check at the preamp that the flange at the
side of the preamp that faces the drum fits to the
air hole.
