QUICK START GUIDE
7.1 Claim Your SmartSwarm Device
Go to the
“Devices’->’Claim Device
” page to bring your new SmartSwarm device into
your Managed Device Farm on SmartWorx Hub.
Type in the entire Device-ID or Serial Number (this is written both on the device itself and
on the box that you took your device out of).
Enter the entire MAC address (this is written both on the device itself and on the box that
you took your device out of), then select “
Check Device ID
” to check that your device is
available to be claimed by you. Assuming it is, then select “
Claim Device
”
.
If this process fails, carefully re-enter the information indicated above. Be very careful
not to confuse ‘8’ & ‘B’ or ‘0’ & ‘D’/‘C’. If the process still fails, please contact B+B
SmartWorx technical support.
Your device is now available for you to manage.
By selecting the “
Devices/View Devices
” screen we can see that the device is available,
and that it is currently On-line.
In order to fully verify the installation, please check that the device is shown as “
Online
”
in SmartWorx Hub:
6