QUICK START GUIDE
1. Introduction
The SmartSwarm
™
342 IIoT Gateway provides configuration management, data
aggregation, filtering and business logic for data recovered from a mesh-network of
connected WZZARD
™
MESH wireless nodes.
Safety
• Use the device in compliance with national and international law and in compliance with
any special or additional restrictions regulating use of the Advantech B+B SmartWorx
device in specific applications and environments.
• Use only the original accessories as provided by Advantech B+B SmartWorx. Using
unapproved accessories can result in device damage, warranty termination, and/or
violation of legal regulations.
• Unauthorized device or accessory modification can result in device damage, warranty
termination, and/or violation of legal regulations.
• Do not open the device.
• When connecting the device to a power supply, do not exceed the defined voltage.
• Do not expose the device to extreme ambient conditions. Protect the device against
dust, moisture and high temperature.
Hereby, Advantech B+B SmartWorx s.r.o. declares that the radio equipment type
SmartSwarm
SG300
(versions with radio interface only),
SG303, SG305
is in compliance
with Directive
2014/53/EU
. SmartSwarm SG300 versions without radio interfaces are
in compliance with the essential requirements and other relevant provisions of Directives
2014/30/EU
and
2014/35/EU
.
The full text of the EU Declaration of Conformity is available at the following internet
address:
www.advantech-bb.com/eudoc
SmartSwarm 342
Quick Start Guide
!
© 2017 Advantech B+B Smartworx
1
