START GUIDE
2
First Use
It is necessary to connect all the components that are required to run your applications
before putting the router into operation.
The router cannot be operated without connected antenna, inserted SIM card and con-
nected power supply. If there is no connected antenna during operation of the router, the
router may be damaged!
XR5i v2 router is not equipped with a 2G/3G/4G module which means that SIM card
holders and antenna connectors (except for
WiFi
antenna connector) are not available on
the router.
1.
Antenna Connection
Use SMA connector for antenna connection. Main antenna is connected by screwing at
ANT
connector (see figure below).
2.
Inserting SIM Card
The SIM card reader for 3 V and 1.8 V SIM cards is located at the front panel of Conel
router. To initiate router operation it is necessary to insert an activated SIM card with
unblocked PIN to the SIM card reader.
Slide out SIM card holder by pressing the small yellow button right from the SIM card
socket. Insert SIM card into holder and push the holder into the reader (see figure below).
Antenna
cable
SIM card
holder
