B+B SMARTWORK SmartMotion, Руководство по настройке

Страница: 104 / 144

4. CONFIGURATION
Continued from previous page
Item Description
Send SMS when binary input on
I/O port (BIN0) is active Automatic sending SMS message after binary input
on I/O port (BIN0) is active. Text of message is in-
tended parameter BIN0.
Add timestamp to SMS Activates/deactivates the adding a time stamp to the
SMS messages. This time stamp has a fixed format
YYYY-MM-DD hh:mm:ss.
Phone Number 1 Specifies the phone number to which the router sends
the generated SMS.
Phone Number 2 Specifies the phone number to which the router sends
the generated SMS.
Phone Number 3 Specifies the phone number to which the router sends
the generated SMS.
Unit ID The name of the router. The router sends the name
in the SMS.
BIN0 – SMS SMS text messages when activate the first binary in-
put on the router.
Table 58: SMS Configuration
After you enter a phone number in the Phone Number 1 field, the router allows you to
configure the control of the device using an SMS message. You can configure up to three
numbers for incoming SMS messages. To enable the function, mark the
Enable remote control
via SMS check box. The default setting of the remote control function is active.
Item Description
Phone Number 1 Specifies the first phone number allowed to access the router us-
ing an SMS.
Phone Number 2 Specifies the second phone number allowed to access the router
using an SMS.
Phone Number 3 Specifies the third phone number allowed to access the router
using an SMS.
TCP Port TCP port on which will be allowed to send/receive SMS mes-
sages.
Table 59: Control via SMS and AT-SMS over TCP
Setting the parameters in the Enable AT-SMS protocol over TCP frame, you can enable
the router to send and receive SMS messages on a TCP port. This function requires you to
specify a TCP port number. The router sends SMS messages using a standard AT command.
94