background image

INSTRUCTION MANUAL

 

 

LogBox RHT 

Temperature and Humidity Data Logger 

 

Technical changes reserved

 

B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen 

0141 0315-14    07.06.2016

 

Fon +49 771 83160 | Fax +49 771 831650 [email protected] | bb-sensors.com 

4 / 18 

 

3.

 

SECURITY ADVICE 

 

The B+B Thermo-Technik GmbH assumes no liability for damages occurred through failure to observe these security advices.  A 

usage non conform to the instructions given in this manual can damage the device  

 

Body and property damages 

 

 

The use of the measurement system must be restricted to qualified personal. 

 

The system is not adequate for use in atmosphere with explosion danger. 

 

Do not use the system in a high electric or magnetic field area

.  

 

Ensuring of product security 

 

 

The system must be operated only within the limits given in the technical Data  

 

Exposing the system to hot temperatures (higher than the operating temperature) will cause damages in the electronic circuits 
and also damage the housing. 

 

4.

 

WASTE AND DISPOSAL ADVICE 

 

Please return the device to B+B Thermo-Technik GmbH after expiration of its lifetime 

 

5.

 

USAGE ACCORDING TO PURPOSE 

 

Please use the product only for the purposes for which it is conceived. In case of doubt, please first contact B+B Thermo-Technik 
GmbH 

 

6.

 

PRODUCT DESCRIPTION 

 

LogBox  RHT 

is  a  small  portable  electronic  temperature  and  humidity  logger.  Its  internal  sensor  measures  local  environment 

temperature  humidity  and  logs  the  values  in  an  electronic  memory.  Logged  data,  or  ACQUISITIONS,  can  be  later  viewed  and 
analyzed on a PC where they can be opened in tabular and graph forms. 
The  logger  is  supplied  with

  Logchart-II 

software,  which  enables  to  set  up  the  logger  operation  mode.  It  is  also  used  for  viewing 

acquisitions. Other parameters such as end of measurements, logging interval, etc., are easily defined through the 

LogChart-II

 software. 

Acquisitions can also be exported to be analyzed in other applications, such as spreadsheet programs. 

6.1.

 

Supply voltage 

The Temperature and humidity Data logger LogBox RHT is a highly autonomic measurement device. It is supplied with a built-in 3.6 

V lithium battery (CR2032). 

6.2.

 

Unpacking 

The following items must be included in the package: 

 

The electronic logger LogBox RHT; 

 

A CD-ROM with the Logchart-II software and a USB driver; 

 

Quick logger operation guide. 

 

The present operating instructions 

 

Optional : a communication interface (upon request) 

 

 

Содержание LogBox RHT



















Отзывы: