Operation manual
Technical changes reserved
Infrared-thermometer IR 8895
0141 0316-190 30.11.2021
1 °C-Display
2 °F-Display
3 Temperature measurement display
4 Emission degree display
5 Laser beam active status display
6 Emission Symbol
7 Low-Battery display
8 Data-Hold display
A °C / °F Changeover key
•
changeover between °C and °F
•
reduce no of digits
B Background illumination key
•
On/Off for the light
•
increase no of digits
C Mode/Save-key
•
activate emission input
•
confirm emission input
D Laser ON/Off key
•
Activate and de-activate the laser
E Activation key (Trigger)
•
activate the measuring function
5.2
Inserting batteries
Before operating the instrument for the first time, insert two new 1.5 V-Batteries type Mignon AA. Instructions on inserting batteries have
been described in detail in the section „Maintenance and cleaning“.
5.3
Laser beam activation/de-activation
For a confidence of having done an exact measurement, the infrared thermometer 8895 is provided with a red point laser. This laser beam
approximately shows the centre of the measuring spot. To activate the laser beam press and hold the Trigger and press the laser On/Off
key
[D].
The symbol „Laser beam active“ appears on the screen as a confirmation of activation
[5].
For deactivation, repeat the above
procedure. The symbol „Laser beam active“ disappears from the display.
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 8316-50 | [email protected] | bb-sensors.com
6 / 12
