B-AMP Bergantino, Руководство пользователя, Страница: 21 / 25

20
ð
This reset will Not erase any stored Speaker Profiles in the B
|
AMP ’s memory, but it
will erase any stored user memory settings in Mem1 and Mem2 .
ð
It is Not recommended to do a Factory Reset with a speaker connected to the
B|AMP ’s output, as audible pops may be heard.
Screen 13 – Software Rev. Menu
This menu displays the current version of the software loaded into your B
|
AMP .
It will also be displayed upon power up on the welcome screen menus.
Firmware Upgrade
If new software becomes available for your
B
|
AMP , you can upgrade the firmware via the USB
port by doing the following:
•
Load the firmware *.hex file onto a FAT32 formatted thumb drive.
•
Rename the file to bampfw.hex (all lower case)
•
With the B
|
AMP ’s power off, insert the thumb drive into the USB port
•
While holding the Prog button in, turn the B
|
AMP on and continue to hold the Prog
button in until the green Prog led turns on.
•
Once the Home Screen appears on the LCD display, remove thumb drive and recycle
power.
•
Your new software is ready to go!