Introduction to Grizzly GP-1-ETL
B-AIR.COM
Your new B-Air Grizzly GP-1-ETL blower and dryer has a 1 HP high-efficiency
motor with the following features:
• State-of-the-art construction
• Safety screens on open vents
• Easy-to-use carrying handle
• A kick stand, which allows for added height, when needed.
• 3-speed switch
Operation/Use
This high-air volume blower is intended to dry, inflate and move air. It is suitable
for a variety of applications.
A) Carefully place the Grizzly B-Air unit on a stable, flat and dry surface during
operation.
B) Use free standing or with attachments
(1) The Grizzly B-Air unit can be positioned to aim airflow across flat surfaces
or it can be angled upward. Raise or lower the attached stand for higher
adjustment.
(2) Pet Drying - attach the den drying kit for multiple cage drying.
(3) Inflatables - attach an inflatable tube around the exhaust opening using
straps, velcro or any other form of tightener.
C) Turn on the switch to desired speed and make sure it is operating correctly.
D) All blowers/dryers in operation must be supervised at all times.
Warning
All blowers in operation must be supervised and attended to, at all times.
The use of a 3-prong to a 2-prong adapter is prohibited; use only a 3-prong
adapter.
If the power supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons, in order to avoid a hazard.
3-SPEED MAIN SWITCH
CARRYING HANDLE
AIR INTAKE
AIR OUTLET
KICK STAND
