B-52 US-1200 Скачать руководство пользователя страница 21

B-52 US Series Professional Power Amplifiers  - Instruction Manual

THE BEAUTY OF POWER

US SERIES AMPLIFIERS

Thank you for choosing the US-Series Professional Amplifiers, a 

product by E.T.I. Sound Systems, Inc. For purposes of this war-

ranty B-52 shall mean E.T.I. Sound Systems, Inc. B-52 manufac-

tures some of the world’s best audio products and takes great 

pride in thoroughly testing each B-52 product prior to shipment. 

US-SeRIeS PROFeSSIONAl AMPlIFIeR  WARRANTy:

B-52 warrants to the original purchaser that this US-Series 

Professional Amplifier will be free from defects in material and 

workmanship for a period of (3) THREE YEARS  from the original 

purchase date. A dated sales receipt will establish coverage 

under this warranty. This warranty will automatically terminate 

(3) THREE YEARS after the original sales date. It is the owner’s 

responsibility to establish date and place of purchase by accep-

tance evidence at the time service is being sought.

ThIS (3) ThRee-yeAR

 warranty does not cover service or 

parts to repair damage caused by accident, disaster, misuse, 

abuse, wear and tear, subjecting the unit to power in excess of 

its published rating, damage due to lightning or power surges, if 

the serial # has been altered or removed, inadequate packing or 

shipping procedures and service, repair or modifications to the 

US-Series Professional Amplifier which has not been authorized 

or approved by B-52 in writing. Parts supplied under warranty 

may be new or rebuilt at the option of B-52. This warranty is in 

lieu of all other expressed warranties. If this product is defec-

tive in materials or workmanship as warranted above, your sole 

remedy shall be repair or replacement.

This is not a service contract and this warranty does not include 

maintenance, cleaning or periodic check-up.  B-52 reserves the 

right to make changes in design and/or improvements to its 

products without any obligation to include these changes in any 

products manufactured.

INCIdeNTAl OR CONSeqUeNTIAl dAMAgeS:

In no event shall B-52 be liable for any incidental or consequen-

tial damages arising out of the use or inability to use any B-52 

product, even if B-52 or a B-52 dealer has been advised of the 

possibility of such damages, or any other claim by any other 

party. Some States do not allow the exclusion or limitation of 

consequential damages, so the above limitation and exclusion 

may not apply to you. This warranty gives you specific legal 

rights and you may also have other rights that may vary from 

State to State.

PURChASINg FROM UNAUThORIZed deAleRS:  

If this product was purchased from an unauthorized dealer there 

are no warranties, express or implied, including the implied 

warranty of merchantability and the implied warranty of fitness 

for a particular purpose and this product is sold “as is” and 

“with all faults”.

ReTURN PROCedUReS:

In the event product repair is needed, follow the procedure out-

lined below. Contact B-52 (1-800-344-4ETI or 1-323-277-4100) 

from 8am to 4:30pm Pacific Standard Time, for the location of 

the authorized service center nearest you. Follow the service 

center’s instructions regarding return of the product. In some 

instances B-52 may request that you return the product directly to 

B-52 for service or repair. 

After speaking with a B-52 representative, you will be issued 

with a return authorization number (RAN) which you need to 

clearly label the returned merchandise with. If you are sending 

the product by common carrier, package it carefully and send 

it with transportation prepaid by traceable, insured method to 

B-52, or Authorized Service Center. Package the product using 

adequate padding material to prevent damage in transit.  The 

original packaging is ideal for this purpose. Include your name, 

address, RAN #, copy of your receipt and telephone number 

where you can be reached during business hours. 

FOR yOUR PROTeCTION:

Please complete and mail the Purchase Information Card within 

(10) ten days of the date of purchase so that we may contact 

you directly in the event a safety notification is issued in accor-

dance with the 1972 Consumer Product Safety Act. In addition, 

we ask that you complete the brief questionnaire so me may ana-

lyze your answers and in this way, help us evaluate our customer 

needs.

CUSTOMeR SeRVICe:

Our dedicated staff is ready to help you with any B-52 warranty 

or product questions you may have. Please call 323-277-4100 

(9:00AM to 4:00PM Pacific Standard Time, United States).

LIMITEd WARRANTY

21

Содержание US-1200

























Отзывы: