440EX/LX AT
MAINBOARD
AWARD BIOS SETUP
4-19
4.11
SUPERVISOR PASSWORD / USER PASSWORD
The password entry in these field is different to what was mentioned in page 2-2. The
password setting in the previous pages is used to power on your PC system, However,
the “SUPERVISOR PASSWORD” and “USER PASSWORD” will be used to check
the authority when power-on. Whenever there is the password stored in either of these
fields, the correct password will be requested so that the PC system will continue to
load the operation system.
You can enter up to eight alphanumeric characters here. When you have typed in the
password and pressed the “Enter” key, you will be asked to reconfirm your password
again to complete password setup. If you press the “Enter” key twice without any
alphanumeric character entered, the PASSWORD will be disabled.
If the “User Password” and the “Supervisor Password” are both enabled and they have
different password setup, “Supervisor Password” is always has the higher priority,
Basically, an “User” is only authorized to change the content of “User Password”,
while a “Supervisor” has the authorization to dominate all settings.
4.12
IDE HDD AUTO DETECTION
ROM PCI / ISA BIOS (2A69JXXX)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP
SUPERVISOR PASSWORD
BIOS FEATURES SETUP
USER PASSWORD
CHIPSET FEATURES SETUP
IDE HDD AUTO DETECTION
POWER MANAGEMENT SETUP
SAVE & EXIT SETUP
INTEGRATED PERIPHERALS
PNP/PCI CONFIGURATION
EXIT WITHOUT SAVING
LOAD SETUP DEFAULTS
ESC : Quit
: Select Item
F10 : Save & Exit Setup
(Shift)F2 : Change Color
Time, Date, Hard Disk Type ...
