AZZA PT-5ITB, Руководство по эксплуатации

Страница: 39 / 45

PT-5ITB
SYSTEM BOARD
AWARD BIOS SETUP
5-8
5.7 POWER MANAGEMENT SETUP
ROM PCI / ISA BIOS (2A59IXXX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User
Define ** Reload Global Timer Events **
PM Control by APM : Yes IRQ[3-7 , 9-15], NMI :Enabled
Video Off Method : Blank Screen Primary IDE 0 :Disabled
Video Off After : Standby Primary IDE 1 :Disabled
MODEM Use IRQ : 3 Secondary IDE 0 :Disabled
Doze Mode : Disabled Secondary IDE 1 :Disabled
Standby Mode : Disabled Floppy Disk :Disabled
Suspend Mode : Disabled Serial Port :Enabled
HDD Power Down : Disabled Parallel Port :Disabled
VGA Active Monitor : Enabled
Soft-Off by PWR-BTTN : Delay 4 Sec.
Resume by Ring
: Enabled
Resume by Alarm : Disabled
ESC : Quit
éêçè
: Select Item
IRQ 8 Break Suspend : Disabled F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
Fig. 5-6 POWER MANAGEMENT SETUP screen.
WARNING :
The POWER MANAGEMENT SETUP in this screen are provided so that technical
professionals can modify the Chipset to suit their requirement. If you are not a technical
engineer, do not use this program!
Power management :
This setting controls the Power Management functions. “User Define” allows the values
of all parameters could be modified. “Min Saving” and “Max Saving” fixed the values of
four parameters, including “Doze Mode”, “Standby Mode”, “Suspend Mode” and “HDD
Power Down”. “Disable” disabled all Power Management functions. Default is “User
Define”.