44
BIOS SETUP
BIOS SETUP
BIOS
Set
u
p
3.10 Frequency/Voltage Control
3.10 Frequency/Voltage Control
CMOS Setup Utility - Copyright (C) 1984 - 2000 Award Software
CPU Vcore Select
: Default
Item Help
Auto Detect DIMM / PCI Clk
: Disabled
Menu Level
Spread Spectrum Modulated
: Disabled
Clock By Slight Adjust
: 133
Frequency/Voltage Control
CPU Vcore Select
This selection field allows you to fine-tune the CPU core voltage (Vcore). Basically,
when you use the default setting, the mainboard will automatically detect the CPU
type and select the proper Vcore for the CPU. So most of the time, you need not have
to make any selection for Vcore setting. However, if you wish to over clocking your
CPU, you may adjust the CPU voltage to run at a higher speed. In this case, you may
use this field to select other desire Vcore for the CPU. When press “Enter”, a menu
with voltage selection will appeared for your selection. The selectable Vcore voltage
start from the minimum value 1.100V with an increment of +0.025V to the maximum
value 1.850V.
Auto Detect DIMM/PCI Clk
When “Enabled” is selected, the mainboard will detect the presence of devices on
DIMM and PCI slots. When there is no device presented on some of the PCI or DIMM
connector, the clock on the related DIMM and PCI slot will be disabled to reduce the
Electro-Magnetic Interference (EMI).
Spread Spectrum Modulated
When Spread Spectrum is enabled, the EMI radiation on this mainboard will be
reduced.
Clock By Slight Adjust
You can use this field to adjust the front side system bus clock speed of the CPU. The
Clock By Slight Adjust
Min = 133
Max = 166
Key in a DEC number :
"#$%
: Move Enter : Accept ESC : Abort
