AZZA Chroma 410 Series, Руководство пользователя

Страница: 11 / 12

Parallel Connection
("daisy-chaining")
Digital RGB
Digital RGB
Digital RGB
1 2
3 4
+5V
No Pin Ground
Data
RGB1
RGB2
1 2
3 4
+12V
R B
G
RGB1
All lighting modes are controlled
by motherboard software.
CAUTION
The addressable RGB fan has a 3-pin connector (4 holes). Please ensure that you are connecting the 3-pin connector
on the fan to the 3-pin RGB header on the motherboard or RF Remote connector.
Do not plug it into the 4-pin header, as the incompatible voltage will fry the fan. The 3-pin connector on the fan still has
4 holes, but the 4th hole is intentionally blocked, for this reason, so please do not try to force it!
Our digital RGB devices are WS2812B-compliant. Each fan contains 18 digital/addressable LED diodes. The WS2812B
standard supports up to 60 diodes at the maximum for a single header, so please do not daisy-chain more than 3
digital RGB fans together.
If you do not have a motherboard that is compatible with digital RGB, then you can opt to use the included
RF remote and receiver.
AZZA PRISMA Digital RGB Fan Installation For Motherboard