VIA 82C693
MAINBOARD
AWARD BIOS SETUP
4-7
4.6
CHIPSET FEATURES SETUP
ROM PCI / ISA BIOS (2A69KXXX)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Bank 0/1 DRAM Timing
: SDRAM 10ns Auto Detect DIMM / PCI Clk
: Enabled
Bank 2/3 DRAM Timing
: SDRAM 10ns Spread Spectrum Modulated
: Disabled
Bank 4/5 DRAM Timing
: SDRAM 10ns CPU Host / PCI Clock
: Default
Bank 6/7 DRAM Timing
: SDRAM 10ns CPU Warning Temperature
: Disabled
SDRAM Cycle Length
: 3
Current CPU1 Temperature
: xx
/xx
DRAM Clock
: CPU CLK
Current CHASSIS FAN Speed : xxxx RPM
Memory Hole
: Disabled
Current CPU FAN Speed
: xxxx RPM
Read Around write
: Disabled
Concurrent PCI/Host
: Disabled
Vcore
: 2.00V
+3.3V
: x.xxV
System BIOS Cacheable
: Disabled
+ 5 V
: x.xxV
+12 V
: xx.xxV
Video RAM Cacheable
: Disabled
+12V
:-xx.xxV
- 5 V
: -x.xxV
AGP Aperture Size
: 64M
AGP – 2X Mode
: Enabled
OnChip USB
: Enabled
ESC : Quit
:
Select Item
USB Keyboard Support
: Disabled
F1 : Help
PU/PD/+/- : Modify
F5 : Old Values
(Shift)F2 : Color
F7 : Load Setup Defaults
Fig. 4-5 CHIPSET FEATURES SETUP screen.
WARNING :
The selection fields on this screen are provided for the professional
technician who can modify the Chipset features to meet some specific
requirement. If you do not have the related technical background, do
not attempt to make any change except the following items.
Bank 0/1, 2/3, 4/5, 6/7 DRAM Timing :
(Default Setting: SDRAM 10ns)
The DRAM timing of Bank 0/1, 2/3, 4/5, 6/7 in this field is used to adjust the access
time of the memory subsystem. Depending on different memory chips installed on the
board, you need to select different timing so that your PC system will be working
properly. Different timing will lead to different system performance. However,
improper setting in this field may cause system unstable. Please check your DRAM
module carefully before you may proceed with the setting.
SDRAM Cycle Length :
(default setting: 3 )
The Cycle Length in this field is used to define the CAS latency. The CAS latency is
one of the most important parameter in the memory subsystem because it will deci8de
the system performance. Basically, the default setting “3” is the suggest parameter for
this mainboard. You may also select “2” to make the system faster, Before you can
