Azusa MIK0132, Руководство пользователя, Страница: 23 / 52

23
Owner’s manual
EN
How to use the lavaliere microphone
1. Open the battery compartment by sliding up the cover.
2. Put the battery into the compartment with correct polarity, and close the cover.
3. Switch on the power of the transmitter and when the LED shows, it is ready to work.
4. Be careful to adjust the main control of the transmitter, start from least volume and
slowly turn it to a appropriate level to hear your voice clearly and with feed back. The
system is ready to use.
5. After use, you have to take the battery out of the transmitter to avoid battery.
S
D
A
U
X
I
NA
U
X
O
U
T
SPK OUT 8
¦¸
U
S
B
Warning: Don’t put the microphone directly
towards the horn of the main receiver in near
distance, or it will occur screaming feedback.
Caution: If the LED flash up, it shows the battery is good to use. If the LED is on, it
shows that the battery is low, you have to change the battery before you can use the
system. If the LED does not flash and not on,it shows the battery is dead or polarities
are wrong.
How to use the wireless handheld microphone
1. Open the battery cover.
2. Put the battery into the compartment and make sure you have a right polarity before
you use it.
3. Turn the switch to ON and you can use the microphone now.
4. Please take the battery out if you are not going to use it for a period of time.
Volume
Power LED
Power switch
MIC port
MIC
Cover
Cover
9V battery
chamber
Lavaliere wireless MIC