
About the Azurite D32T
5
The visual display of your handset
1.
Battery indicator.
2.
Date.
3.
Names of functions programmed for the
and
keys. To change these functions, refer to
paragraph “Programming a key”, page 19.
4.
Network indicator.
5.
Low transmission icon: This is displayed to
indicate that the low-transmission mode is active.
When the handset is moved away from the base,
the icon disappears and the low-transmission
mode is deactivated.
6.
Number of handset.
7.
Time.
ECO mode
Your telephone is provided with an automatic power
management system.
When the handset is near to the base, the power
required for transmitting is reduced to a minimum and
the icon
is displayed on the screen.
In addition, a high efficiency mains power unit reduces
the power consumption of the base.
Connecting the base
On the underneath of the base, insert jack on the
telephone cord in its socket (as shown in the
illustration) and connect the other end of the cord to the
telephone wall socket.
Connect the end of the mains power unit lead to the
bottom of the base and plug the mains power unit into
the mains socket.
Handset set-up
Insert the batteries in the battery compartment
ensuring the correct battery polarity, as shown on the
label in the handset. Place the cover back on the
handset by pushing upwards until it is completely
closed.
Remove the protective film on the screen, place the
handset on the base to fully charge the batteries.
The charging icon appears on the screen to indicate the
charging status.
Handset turning on and off
To turn on your handset, hold down the green
key
. The name
TELKOM
is displayed on the
screen.
To turn off the handset, hold down the red key
until the "
POWER OFF
" is displayed briefly on the
screen. Your handset is now switched off.
When the battery charge icon is at
minimum, your screen will not be lit and the
volume level of the handsfree function will
be decreased until the battery is recharged.
01/01 12:00
Alarm
I
Sil.
2
3
1
5
7
6
4
Before making any connections, please
refer to the safety instructions given on
page 2.
Power socket
Telephone socket
To ensure optimum charging, leave the
handset on the base for at least 20 hours
when using the telephone for the first time.
During charging, the batteries may heat up.
This is quite normal and perfectly safe.
LU Azurite D32T- EN.book Page 5 Mercredi, 9. décembre 2009 2:37 14