AzureWave AW-GE870, Руководство пользователя

Страница: 12 / 43

3-4
Give up WiFi-AP Solo Wizard and keep the last configuration.
3.3.1
Configure Infrastructure type network
It is easy to build up infrastructure type network with WiFi-AP Solo Wizard . The next step after
select infrastructure type network is to select the desired connection.
Select the BSS connection list
Select valid wireless BSS, Infrastructure Basic Service
Set, connection nearby your system for connecting.
The listed BSS are touchable access point around you.
You have to pick one from the list and go to next.
z
SSID list box
Four fields are shown in the list box to provide
access point status.
„
SSID: the name of access point
„
Security: the security status of access point. None
means security/password is not necessary. WEP means the access point acquire security/password
to log in.
„
Channel: the channel this access point applies.
„
Signal: The signal strength; higher mean better.
z
Refresh
Rescan the IBSS list.
z
Back
Go back to previous step ~ Select Station
Type.Next
Go to next step of infrastructure type
configuration. It is relative the security status of
selected access point.
„
None: Setup TCP/IP.
„
WEP: A WEP dialog is pope dup before Setup
TCP/IP as below picture. You have to input the password/network key to join this access point
before setup TCP/IP. The password/network key is defined by the administrator of access point.
The invalid network key will stop going to next step.