20
AZT
POS Desktop Receipt Printer User Guide
AZT
POS Desktop Receipt Printer User Guide 21
4. You will need to install the printer driver on the
bluetooth COM port that was created.
3.2.9. Installing Printer Drivers
Note: The following instructions are for users with windows 7,
8, and 10 operating systems. Download the Driver Installation
Tool from http://www.aztpos.com/downloads/
1. Run AZT.7036
2. Select AZT-805W from the list.
3. Chose the port you connected the printer to. Example,
if you connected the printer via USB, look for USB001 on
the list
4. Click Finish
3.2.10. Checking Network Connectivity
Note: The following instructions are for users with windows 7,
8, and 10 operating systems
1. Press the Start button.
2. Select the Devices and Printers tab.
3. Right-click the printer you installed.
4. Select Printer Properties from the drop-down menu.
5. Click Print Test Page. The printer should print out a
“Congratulations” page if the network is configured
correctly.
4.1. Paper Roll
4.1.1. Refilling the Paper Roll
If there is no paper in the paper
holder, perform the following to
replace the paper roll:
1. Open the printer cover by pulling the release latch
forward, located on the side of the printer
2. Remove the empty paper roll.
3. Replace the empty paper roll with a new roll. Ensure that
the roll paper is pulled long enough to fit through the
paper slot when closing the printer cover.
4. Close the printer cover, and press the FEED button.
Printing will resume.
4.1.2. Resolving Paper Alarms
4. Printer Maintenance
