Aztech WMB250AC Скачать руководство пользователя страница 2

 

© Copyright All rights reserved. 
 

No part of this document may be reproduced, republished, or retransmitted in any 
form or by any means whatsoever, whether electronically or mechanically, 
including, but not limited to, by way of photocopying, recording, information 
recording, or through retrieval systems without the express written permission. We 
reserve the right to revise this document at any time without the obligation to notify 
any person and/or entity. All other company or product names mentioned are used 
for identification purposes only and may be trademarks of their respective owners. 

 
LIMITATION OF LIABILITY AND DAMAGES 

THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE 
MANUFACTURER  AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS 
“THE SELLERS”) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, 
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES 
ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF 
TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING 
BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL, 
EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF  BUSINESS 
PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD 
PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE 
SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE 
PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA 
OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, 
EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE 
ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS 
SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF LIABLITY FOR DAMAGES, THE ABOVE LIMITATION MAY 
NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE 
LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE 
EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT. 

 

 

Содержание WMB250AC





























Отзывы: