Aztech VC3000 Скачать руководство пользователя страница 18

Страница: 18 / 20

During use, there would be cases wherein the Aztech VC3000 would stop working
and would be sending an alarm sound followed by a digital display of the error it
encountered.

TROUBLESHOOTING

fAULt

CoDE

fAiLURE

CAUSE

SoLUtioN

E001

Ground Sensor

failure

The sensor tip is blocked

or the cleaner is stuck

by stairs

Gently clean the ground sensor or

carefully lift the vacuum cleaner

manually.

E002

Suction inlet is

blocked or the

dustbin is full

Garbage sensor tip is

dusty and or the suction

is blocked.

Clear the dirt on the sensor tip and

suction inlet.

E003

Left or right

wheel failure

Lines or wiring got

tangled in either the left

or right wheel.

Gently clean the ground sensor or

carefully lift the vacuum cleaner

manually to untangle cables or wiring.

E004

Left or right

side brush

failure

Cables or wiring got

tangled in either the left

or right side brush.

Gently clean the ground sensor or

carefully lift the vacuum cleaner

manually to untangle cables or wiring.

E005

Left or right

wheel lifted up

Left or right wheel

lifted up

Position the vacuum cleaner on a

smooth and stable ground.

E006

Roller brush

failure

Lines or wiring got

tangled on the roller

brush.

Clear or remove the tangled lines or

wiring.

E007

Dust cover

failure

The dust cover is open or

is not tightly secured.

Properly close the dust cover of the

vacuum cleaner tightly.

E008

Dustbin Failure

The dust bin

compartment is

improperly positioned

Reinstall the dustbin compartment and

ensure that it is properly locked into

place.

E009

Battery is low

The vacuum cleaner’s

battery ran out of power

Place the vacuum cleaner back to its

Docking Station to charge the vacuum

E010

The vacuum

cleaner does

not charge

The vacuum cleaner is

turned OFF or the battery

is improperly installed

Turn ON the vacuum cleaner. The

vacuum cleaner can only charge

once ON.

Reinstall the batteries.

•

E011

Sensor or

blocker failure

Sensor is blocked

Clean the transparent part of the

vacuum cleaner’s bumper

Содержание VC3000




















Результаты поиска

Содержание VC3000

Отзывы:

Бренды по названию

Популярные бренды

Aztech VC3000, Руководство пользователя

Результаты поиска

Содержание VC3000

Отзывы:

Бренды по названию

Популярные бренды