Aztech ASF583, Руководство пользователя

Страница: 10 / 16

10
USING THE APPLIANCE
STEP 1
Correctly assemble the fan as shown on the
Stand Fan Assembly section.
STEP 2
Position the fan on a smooth and stable
ground and plug its power adapter to a
power outlet.
STEP 4
Press the ON/SPEED button to turn ON the
fan.
NOTE: By default, the speed is set to LOW.
Upon setting your preferred speed (e.g.
high), and turning it OFF and ON again,
the fan would resume using the previously
selected speed (e.g. high).
ADJUST
HEAD TILT
TIPS BEFORE USING THE FAN
•
Before use, please check if the power voltage of the fan correctly
corresponds to your home’s power supply.
•
If the remote control would not be used for long periods of time,
remove the remote control’s battery.
•
Should damages be found in the appliance, please do not use
the appliance and immediately bring it to the Aztech Service
Center for repair or replacement.
ASSEMBLE AS
REQUIRED
STABLE GROUND
2 METERS
NOTE: Ensure that there are no objects
within 2 meters of the fan’s head that may
hinder its oscillation / swing feature.
STEP 3
Firmly lower or raise the fan’s head angle
until you get the desired fan head angle.