Aztec Beam Sharpy 200, Руководство пользователя

Страница: 12 / 19

Technical parameters:
Lamp Optional Model..
Channel mode: 16
，
or 20CH
Level scanning: 540 ° (16bit precision scan) electronic error correction
Vertical scanning: 250 ° (16bit precision scan) electronic error correction
Color Wheel: 14 colors with white, with rotating rainbow effect.
Gobo Wheel: 17 gobos with rotating gradually change effect and pattern swing effect.
Shut: up to 13 times per second with automatic pulse effect.
Dimmer: 0-100% linear dimmer
Focus: 5 meters to infinity
Prism: 3 or 8 can be choosed
Frost: 0% - 100% linear frost
Control table reset function.
Control table switch bubble function (Switch on or off bulb can choose when with power.
light half-power function
Power supply: AC110V-240V, 50 / 60HZ,
The light body size: 360X410X500
WT:20KG
Signal connection:
The connection of lights and the connection of light and controller must used two core shielding wire with its
diameter not less than 0.5 mm. We should pay special attention that the connection of three core of XLR plugs
and socket cannot contact with inner shell and between core and core also cannot contact.
When use XLR-XLR control line, connect the DMX outlet of controller with the DMX input of the first machine,
and connect the DMX outlet of the first machine with DMX input the second machine. Repeating the process until
all machines connected. At last connect the loop plug with the last lamp’s signal output the connection of
controller mode is completed.
This menu of control display board specifically designs for the various types of moving light equipped with
various function control mode, operate easy. For some operation that some type of light without it is invalid
corresponding menu options setting.