Aztec Tents Tidewater Sailcloth Tents, Руководство по эксплуатации продукта

Страница: 10 / 40

www.aztectent.com
Step 4:
Hold the Center Pole ring in place and move the squaring jig so that the
Side Pole Marker 3 ring is positioned over the mark at SP-B. With the
Center Pole Ring and Side Pole Marker 3 ring fi rmly secured, pull on the
Side Pole Marker 2 ring to triangulate the next side pole position. Pull
the stake line out so that it is inline with the Center Pole and Side Pole
Marker 2 rings and mark the stake and side pole positions.
Step 5:
Continue around the end marking each side pole and stake location.
Repeat on the opposite end of the tent.
Step 6:
Lay out a ground cloth over the area to be covered by the tent.
Unfold the tent top fabric over the ground cloth with the reinforcement
side facing down.
For a one piece top, insert the Tidewater fl agpole while tent is half
opened.
Stretch out the balance of the fabric and pull the perimeter termination
plates to the leg points you have marked in steps 1-5.
If one piece top, skip to step 18.