Copyright © Azoteq (Pty) Ltd 2022
AZBAT24100C User Manual
Page 2 of 13
All Rights Reserved.
Revision 1.02
September 2022
Azoteq
PowerSense
®
Series
Revision History
Version
Release date
Change Notes
1.00
18 May 2022
Creation
1.01
04 August 2022
Troubleshooting, Installation and Parameters
1.02
10 August 2022
Website Warranty Link
Disclaimer
This product manual provides further detail on the AZBAT24100C LiFePO4 battery. Please read the
operating instructions in this document before using the battery. Also familiarise yourself with the
warranty conditions of this product to ensure it is operated within stipulated requirements.
Please complete the battery registration from the Azoteq website to activate your warranty.
(
https://www.azoteq.com/warranty/
)
Overview
The AZBAT24100C incorporates 8x3.2V 100Ah (8S1P configuration) Lithium-Iron Phosphate
(LiFePO4) cells with a recommended 0.3C charge and 0.5C discharge current rating. The battery
incorporates a battery management system (BMS) which provides the following functionality:
•
Protection
o
Cell overcharge and discharge
o
Short circuit
o
Over and under temperature
o
Total over- and under-voltage
•
Control
o
Cell balancing
The BMS has been tested with leading inverters, including Synapse, Voltronic and GroWatt and has
been UN38.3 and IEC 62619 certified.
The battery is mounted in a durable steel casing with spring loaded handles for easy handling. It
features a LCD display* with an display on/off button. The battery is fitted with M8 terminal
connections for sturdy connection to the battery cables.
*The SoC displayed on the LCD is only an estimation which is based on the battery pack voltage.
This will be most accurate when the battery is in steady-state no-load.
