TROUBLESHOOTING
WARINIG: Remove all paintballs, loaders, and air tanks
before disassembling the marker.
Symptoms
Leaks from Pump Guide
(PC01)
1. Replace R015 Oring
Loose ASA
1. Tighten M5 x 10L screw
located inside of the trigger
frame
Striker is not catching the
sear when pump handle is
pulled back
1. Striker may not be in the right
orientation. Rotate the striker
180 degrees.
2. Check to make sure the
Bolt Pin (PBP3) is pushed all
the way down
Repair Step(s)
TROUBLESHOOTING
WARINIG: Remove all paintballs, loaders, and air tanks
before disassembling the marker.
Symptoms
Leaks down the barrel /
body and trigger frame
1. Tighten M8 x 8L Screw
2. Replace Cup Seal (CS01)
3. Replace Orings RP15 and R015
4. Replace Valve (MFV2)
Leaks between Body and
Vertical Adapter
Leaks from middle of the
regulator, small hole above
the set screw
1. Replace R015 Oring between
Vertical Adapter (KVAS1) and
Body (KCB)
1. Replace RV09 Oring
2. Replace RV14 Oring
Leaks from ASA, small hold
on the bottom
(nearest the tank)
1. Replace the Tank’s Oring
Repair Step(s)
KPC+ SCREW CHART
SIZE: 1:1
PART NUMBER AND NAME
M3 x 3.5L
DETENT COVER SCREW
M4 x 4L
RETAINING SCREW
M4 x 8L
GRIP PANEL SCREW
M4 x 9.5L
FEEDNECK LOCK SCREW
M4 x 12L
FEEDNECK LOCK SCREW
M5 x 10L
MAIN BODY SCREW
M5 x 8L
ON/OFF BOTTOM ASA SCREW
M5 x 12L
BOTTOM ASA RETAINING
SCREW
M5 x 16L
VERTICAL ASA SCREW
M6 x 8L
BOLT SCREW
M8 x 8L
VALVE SCREW
KPC+ O-RING CHART
SIZE: 1:1
PART NUMBER AND NAME
RV09
NO.9 O-RING
(BROWN)
RV08
NO.8 O-RING
(BROWN)
R010
NO.10 O-RING
(BLACK)
R014
NO.14 O-RING
(BLACK)
RV14
NO.14 O-RING
(BROWN)
R015
AZ O-RING
(BLACK)
RP15
FRONT VAVLE O-RING
(CLEAR)
R016
NO.16 O-RING
(BLACK)
RB01
BARREL O-RING
(BLACK)