16
VERSION 2.0
06 - 2011
4.5.
TRIGGER.
In the coin extraction process this device compresses the trigger spring and at a
certain point it shoots the coin out of the hopper.
The Hopper U-II has only one type of trigger, whereas previous models had two. It
is made of plastic.
4.6.
CONTROL BOARD.
This element governs the
hopper
and communicates with the machine. The wiring
looms that correspond to the counting, filling and emptying functions and motor are
connected to it. There are different models depending on the protocol used (ccTalk
or parallel) and its operation with Azkoyen tools.
4.6.1. CcTalk control board. Switches and connectors.
There is only one model of the board for all the Hoppers U-II ccTalk.
The following figure shows the use of each one of the connectors and switches
located on the control board.
Figure 10. Control board ccTalk
1- Protocol/Machine connector
2- Coin exit detection
3- Double count
4- Empty sensor
5- Full sensor
6- Configuration switches
7- Tools connector
8- Motor
1
2
3
4
5
6
7
8
