Azkoyen ES-525, Описание продукта

Страница: 28 / 40

10015UK 01 -2004
Technical information:
ES-525 Validator
27
Ô
Pins 7, 13 and 15
These pins correspond to the route the coin takes, if a
line
is joined to one of these pins.
Channel Pin number
A --
B 15
C 13
D 7
Programme the sorter the following way:
Using a Molex 90142-0018 connector, and a Molex 90119 Tin/Lead terminal or similar, join the
corresponding line to the coin you need to classify, (Pins 1, 8,10, 12, 16, 17, 18), with the
corresponding pin to the channel you want to send it (Pin 7, 13, 15). The coins that are not
joined to any channel will go to channel A.
If more than one coin should go to the same channel, diode must be used so none of the lines
are joined, the lines should be joined to the anode (A) on each diode and the cathodes (K) to
the channel.
You can also send the same coin to different channels.
Whenever the validator detects the existence of a route connector, it will work with the router
and not take into account the default settings on the
validator
.
JP8: Sorter override connector
JP8 is a 10-pin male connector and the type of connector used for this connection is a Molex
22-01-2105, terminal Molex 4809C Tin/Lead or similar.
Through this connector, the machine informs the
validator
which direction or channel cannot
be used because the corresponding hoppers are full.
EXAMPLE