Remark: Before installing the power management software, ensure that the HDD
is properly installed and connected to the computer.
C. Dr. Power: Power Management Software Installation and Use
1). Installation:
a. Select the folder Dr Power AP in the software CD.
b. Run the file Setup.exe. The program will walk you through installation.
2). Use
a. Interface, as shown in Figure 1 will pop up when running Power Management software.
b. Adjust the time of HDD standby mode if needed (shown as Figure 2).
c. Turning ON ‘System Power Management’ will eable the HDD to spin-down when the PC sleeps.
Click ’Save’ and then close.
5
AZiO Corp.
Figure 1 Figure 2
