AZEK TimberTech Impression Rail Express 6 Скачать руководство пользователя страница 8

Page 8

Drink Rail (deck board)

Post Cap

Pre-Assembled Panel

Bottom Rail Cover 

(inverted; purchased separately)

Bottom Rail Cover

(included with panel kit)

Support Rail

Post Skirt

Attach Clips

3" Post

#8x3/4" Self-Drilling Screws

#8x3/4" SS

MOD Truss 

K-Lath Screws 

(phillips head)

Impression Rail Express

®

Drink Rail Clip Assembly

Top Drink Rail Clip 

in first full opening

INSTALLING DRINK RAIL – STAIR PANELS 

FOR IMPRESSION RAIL EXPRESS

®

IMPORTANT NOTES:

For all rail installations, posts 

must be plumb and aligned with 

one another.
For a proper finished look on  

Over-The-Post Drink Rail 

applications, make sure Bottom 

Rail Cover is even with the top 

of the posts and that posts are a 

consistent height. Prior to installing 

rail assembly to Post, ensure 

that rail assembly is positioned 

(height wise) to eliminate any gaps 

between Deck board and Bottom 

Rail Cover (inverted, positioned  

on top). 

(Dia. A)

IMPORTANT NOTE:

The top Drink Rail Clip will likely not 

fit in the first opening and should 

be placed in the first full opening, as 

close to the post as possible.

These instructions cover installation of the Drink Rail (Deck 

board Top Rail)

 on Impression Rail Express

®

 Stair Panels.

These instructions 

DO NOT cover the entire level rail assembly process. Please 

follow through step 3 on pages 10-12 in TimberTech Impression Rail Express

®

 

Install Guide to build stair rail assembly prior to installing Drink Rail.
The full 

TimberTech Impression Rail Express

®

 Install Guide can be found at  

www.TimberTech.com

.

Bottom Rail Cover

Drink Clip

Support Rail

Bottom Rail Cover

Support Rail

Center and measure 

top of Deck Board 

a consistent distance 

from top of Post. 

Center and align 

bottom of Deck 

Board with top 

of Post.

Drink Rail (deck board)

Post Cap

Post

Balusters

Dia. A

2. OVER-THE-POST 

APPLICATIONS

This Installation Guide applies to the 

use of this product in a Drink Rail 

application. If you are completing a 

standard TimberTech railing installation, 

please refer to the full 

TimberTech 

Impression Rail Express

®

 Installation 

Guide found at 

www.TimberTech.com

.

1. BETWEEN-THE-POST 

APPLICATIONS

– OR –

Содержание TimberTech Impression Rail Express 6













Отзывы: