Thank you for purchasing the Azden SMX-100 Electret Condenser Stereo Microphone.
Before using the product, please read this operating manual thoroughly. Keep this
manual along with the warranty card for future reference.
POWER
The SMX-100 must be powered by Phantom-
Power. To power the unit, connect an XLR cable to
the microphone from a voltage source that supplies
between 11 and 52VDC. (see wiring diagram below)
MIC Output:
The SMX-100 has a balanced 5-pin XLR
connector.
SHOCK-MOUNT HOLDER
The SMX-100 is supplied with a cameramountable
mic holder. Snap the near portion of the
microphone into the holder. To secure the holder,
slide the holder into the camera shoe and tighten the
thumbwheel by turning it clockwise.
SPECIFICATIONS
Type:
Frequency Response:
Sensitivity:
Impedance:
Maximum SPL Input Level:
Signal to Noise Ratio:
Power:(Phantom-Power)
Weight:
Dimensions:
Output Type:
Supplied Accessories:
Electret condenser stereo microphone
20
−
18,000Hz
Uni-directional; -33dB at 1kHz (1V/Pa)
180
Ω
at 1kHz
120dB SPL (1kHz at 1% T.H.D.)
70dB (1kHz at 1Pa)
11 - 52V DC
110g/3.88oz
21mm diameter/220mm length
0.827 diameter / 8.66 length
5-pin XLR connector.
Shock-mount microphone holder
Windscreen
FREQUENCY RESPONES
POLAR PATTERN
* Due to constant improvements, specifications are subject to change without notice.
shield 1
5 R cold
L hot 2
4 R hot
3 L cold
-70
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
50
100
20
500
Hz
1k
2k
5k
10k
20k
0゜
90゜
270゜
0.5
0.5
180゜
0.5
0.5
1kHz
R ch
0゜
90゜
270゜
0.5
0.5
180゜
0.5
0.5
1kHz
L ch
200
All manuals and user guides at all-guides.com
