Azbil TTY6800Z Series, Спецификации и инструкции, Страница: 5 / 20

5
AB-6600
„
Specifications
Item Specification
Differential
gap
Model
TY6800Z Two-position control Approx. 3–11 °C (variable)
Model
TTY6800Z Two-position, two-step
control Each microswitch's differential gap: fixed to approx. 3 °C
Differential between two switches: approx. 2.5–8 °C (variable)
Switching operation Refer to Figure 13., Figure 16. , and
„
Operation.
Model
TY6800Z When temperature rises, terminal R and W are
Closed
, terminal R and B are
Open
.
When temperature falls, terminal R and W are Open , terminal R and B are Closed .
Model
TTY6800Z When temperature rises, switch 1 terminal R and W are Closed , terminal R and B are Open .
Furthermore, temperature rises, switch 2 terminal R and W are
Closed
, terminal R
and B are Open .
When temperature falls, switch 2 terminal R and W are Open , terminal R and B are Closed .
Furthermore, temperature falls, switch 1 terminal R and W are Open , terminal R and
B are Closed .
Switch contact rating Motor load 120 V AC 240 V AC
Operating 8 A 5.1 A
Startup 48 A 30.6 A
Environment conditions Operating conditions Transportation/storage
conditions
Ambient temp. 0–50 °C -20–60 °C
Ambient humidity Max. 90 % RH
(without condensation)
Max. 95 % RH
(without condensation)
Temperature
sensor Size Max. φ6.5x152 mm
Material Copper
Max.
pressure
0.35 MPa
Capillary
tube Length Approx. 1.5 m (actual 1.35–1.6 m)
Approx. 5 m (actual 4.75–5 m)
Note Length of Model TTY6800Z7000 (temperature range: 5–90 °C) is 1.5 m only.
Material Copper
Installation Mount the thermostat using the mounting holes on the back side of its case.
(See
Figure 7. and 8. )
Wiring Wire to the terminal screws (M4) on the microswitch.
Weight Model
TY6800Z 0.45 kg
Model
TTY6800Z 0.5 kg
Major
materials Cover Polycarbonate resin, natural gray (Munsell value: N6.8)
Case Cold rolled steel plate (1.2 mm thick) with galvanization
Accessories Round machine screws (M4x12), 3 pcs
Hexagonal nuts (M4), 3 pcs
Grommet (nylon resin, black), 1 pc
Auxiliary parts
(to be ordered separately)
Immersion well Model 112624AA-J, R1/2 screw, SUS304
(See
Figure 2., AB-4074
)
Pressure fitting Part No. 83165370-001, 1/2NPT screw, brass
(See
Figure 3. )
Temperature sensor
holder Model DY3002A1011, construction material
(See Figure 4., AB-4009 )