iii
CAUTION
This device is a precision instrument. Do not drop it or subject it to
shock. Doing so might damage the device.
When connecting flanges, tighten with the specified torque.
Otherwise gas could leak from the pipe, causing injury.
When mounting the device, firmly fasten to prevent vibration.
Do not peel off the pipe connector port seals until immediately before
you connect the piping. Doing so might allow foreign objects to enter
the connector port and cause defective operation.
Do not flush when the device is mounted in the pipe.
Doing so might cause damage due to entry of foreign matter and cause
faulty operation or errors in measurement.
Before wiring, be sure to turn the power OFF.
Before supplying power, be sure to check that there is no wiring error. A
wiring error might damage the device or cause a dangerous condition.
Do not use this device outside of the operating pressure range. Also,
do not subject this device to a pressure above the pressure resistance.
Doing so might damage this device.
