AB-7163
6
Specifications
Basic specifications
Item Specification
Rated voltage
100 V AC to 240 V AC, 50 Hz/60 Hz
Allowable voltage range
85 V AC to 264 V AC, 50 Hz/60 Hz
Power shutdown detection 80 V AC or less
Power consumption
40 VA
Power supply
Leakage current
1 mA or less
Ambient temperature
0
C to 50
C
Ambient humidity
10 %RH to 90 %RH (Non-condensing)
Altitude
2000 m or lower
Rated operating
conditions
Vibration
Max. 3.2 m/s² (at 10 Hz to 150 Hz)
Ambient temperature
-20
C to 60
C
Ambient humidity
5 %RH to 95 %RH (Non-condensing)
Vibration for storage
Max. 3.2 m/s² (at 10 Hz to 150 Hz)
Environmental
conditions
Transport/storage
conditions
Vibration for transport
Max. 9.8 m/s² (at 10 Hz to 150 Hz)
Green LED ON:
Power ON
Power supply (POWER)
Green LED OFF: Power OFF
Red LED ON:
Major failure or system restart
Major failure (ERR1)
Red LED OFF:
Normal operation
Red LED ON:
Minor failure or system restart
Operation
Minor failure (ERR2)
Red LED OFF:
Normal operation
LED indication
Communication Expansion
bus
Transmit (TX), Receive (RX)
RAM, RTC*
Lithium battery backup
Power failure backup
Data file
Non-volatile memory backup
Transmission system
Current transmission
Transmission speed
4800 bps
Transmission distance
500 m
Communications Expansion
bus
I/O control units
Max. 25 units connectable
Weight 400
g
Material (housing), color
Modified PPE, light gray
Power supply, ground
M3 screw terminals (7.62 mm pitch between terminals)
Terminals connection
Expansion bus communication
Screwless push-in terminals
Wiring specifications: I/O control unit
Item Wiring
Wiring
length
Condition
Power supply
JIS IV
2.0 mm² or JIS CVV
2.0 mm² or greater
Grounding
JIS IV2.0 mm² or JIS CVV2.0 mm² or greater
Ground resistance: 100
Ω
or lower
Expansion bus
JCS IPEV-S 0.9 mm²
500 m
Notes:
* Pin terminals cannot be used.
* JIS: Japanese Industrial Standards
* JCS: Japanese Electric Wire and Cable Makers’ Association
Wiring specifications: I/O modules
Item Wiring
Wiring
length
Temperature input
JIS IV, JIS CVV, KPEV
1.25 mm
2
100
m
Voltage/Current input
JIS IV, JIS CVV, KPEV
1.25 mm
2
100
m
Voltage/Current output
JIS IV, JIS CVV, KPEV
0.9 mm
2
, 1.25mm
2
100
m
Modutrol Motor output
JIS IV, JIS CVV, KPEV
1.25 mm
2
100
m
Digital input
JIS IV, JIS CVV, KPEV
0.5 mm
2
, 0.75 mm
2
, 0.9 mm
2
, 1.25 mm
2
100 m
Relay output
JIS IV, JIS CVV, KPEV
1.25 mm
2
100
m
Remote control relay output
JIS IV, JIS CVV, KPEV
1.25 mm
2
100
m
Notes:
* Since a screwless push-in terminals are provided on I/O modules, the wires are connected only by stripping the sheath.
Sheath stripped length: 8 mm (Pin terminal cannot be used.)
* KPEV is a wiring standard provided by Furukawa Electric Co., Ltd.
Specifications of I/O modules, integral type Operator Panel, and UT module
For the specifications of I/O modules and UT module, refer to
Specifications/Instructions of Model RY50XX (AB-6527)
.
For the specifications of integral type of Operator Panel, refer to
Specifications/Instructions of Model RY5001Q/QY5100W
(AB-6546)
.
