3-11
Chapter 3. HOW TO USE THE LOADER
Saving parameters to a file
Parameters that were read from the device or that were changed can be saved to a
file using the following procedure.
(1) Select
[File]
→
[Rename and save...]
on the menu bar, or click the button on
the toolbar.
>> The following screen is displayed.
(2) Enter any name in the
[File name]
field and click the
[Save]
button.
Checking saved parameters
This section describes the procedure for displaying data (parameters) that have
been saved to a file.
(1) Select
[File]
→
[Open]
on the menu bar, or click the
button on the toolbar.
>> The following screen is displayed.
