ATC
CAL
C
C
FF
Fig. D
C
C
Fig. C
Fig. F
ATC
CAL
C
C
Fig. E
-When meter is on, short press to
enter the calibration mode(Fig. F).
-When in calibration mode, skip to
next calibration point by pressing
this key.
-When metetr is off, press this key
and at the same time and then
release the to enter unit setting.
o
o
Press to select C or F (Fig.D).
Then, press button to store the
unit, the display shows "
SA
" for one
second (See Fig.J) and then return
to the normal mode .
5
-Press this key to increase the value
when meter is in pH calibration mode.
Release the key after selecting the
correct calibration value (Fig. E).
The meter is capable of taking measure-
ments with Automatic Temperature
Compensation. "
ATC
" shows under
"
CAL
" at the left corner of the screen.
AUTOMATIC TEMPERATURE
COMPENSATION (ATC)
HOLD
UNIT
CAL
HOLD
UNIT
CAL
