Ayyeka Wavelet Wastewater Quality Kit, Быстрый старт

Страница: 8 / 18

7
Prepare a section of PVC pipe (recommended dimensions
are 12 inches long by 3 inches in diameter).
Drill two (2) holes approximately two (2) inches from the
edge of the PVC pipe, and leave no more than two (2) inches
of horizontal spacing between the holes.
Then, drill two (2) additional holes approximately three (3)
inches above and vertically aligned with the lower set of
holes.
3 in.
2
12 in.
3 in.
2 in.
2 in.
Using caution not to exert too much force, lace one (1) zip
tie through the upper set of drilled holes in the PVC pipe
and firmly secure the sensor. Lace one (1) additional zip tie
on the lower set of drilled holes to firmly secure the sensor
in the PVC pipe.
3
Wastewater Quality Sensor
PVC Pipe
Cable
CAUTION: Applying
too much force on the
sensor with the zip ties
may cause damage.