Ayyeka WAVELET - V2, Быстрый старт

Страница: 17 / 27

17
DOs

Ensure the antenna connector is
secured tightly to the panel connector.

Mount antenna under the open sky or
at least 50cm (20in.) beneath any object.

Mount antenna at least 5 to 10cm (2
to 4in.) away from wall.

Mount antenna at least 5cm (2in.)
away from the Wavelet.

Finalize the antenna setup to the exact
physical conditions. For example, close the
lid, close the door, etc.

Make sure you have a signal and a
successful data transmission by using
the AyyekaGo mobile app.

If needed during installation, use the
Transmit Now command in the
AyyekaGo app or the magnetic
Wavelet Activator to initiate more rapid
transmissions.
ANTENNA MOUNTING
DONTs

Do not attach the antenna to the
Wavelet.

Do not wrap cables, zip ties, or
other items around the antenna.
IMPORTANT NOTE: There are a few-
minutes of delay between a successful
transmission and the use of either of
these methods for initiating data
transmission. Repeating the use of
either method will not expedite data
transmission.
WARNING: If installing in a highly corrosive
environment such as a sewer, apply
technical grease to the antenna and
sensor field attachable connectors after
securing them to the panel connectors.
Ayyeka recommends using Dow Corning
Molykote 55 O-Ring Grease, though
similar products can be effective.