Ensure the antenna connector is secured tightly to the panel
connector.
Mount antenna under the open sky or at least 50cm (20 in.) beneath
any object.
Mount antenna at least 5 to 10cm (2 to 4in.) away from wall.
Mount antenna at least 5cm (2in.) away from the device.
Finalize the antenna setup to the exact physical conditions. For
example, close the lid, close the door, etc.
Make sure you have a signal and a successful data transmission by
using the magnetic key Activator to initiate more rapid transmissions.
DOs
Do not attach the antenna to the device.
Do not wrap cables, zip ties, or other items around the antenna.
DONTs
IMPORTANT NOTE:
There are a few minutes of delay between a
successful transmission and the use of either of these methods for
initiating data transmission. Repeating the use of either method will not
expedite data transmission.
WARNING:
If installing in a highly corrosive environment such as a
sewer, apply technical grease to the antenna and sensor field attachable
connectors after securing them to the panel connectors. Ayyeka
recommends using Dow Corning Molykote 55 O-Ring Grease, although
similar products can be effective.
ANTENNA MOUNTING
AYYEKA
12
