Signal lights on the Hub
5
Top Signal light - green
Second Signal light - orange
First Signal light - red
PoE OUT - unused
WiFi activity light - green
Other wireless - unused
USB - unused
Power light - green
Gateway Hubs have the Power light on steady,
the WiFi activity light flashing, and the Top
Signal light on steady.
Remote Hubs have the Power light on steady,
the WiFi activity light flashing, and the signal
lights on indicating the signal strength to the
nearest Hub:
• Just the first (red) signal light - very low signal
• First (red) and second (yellow) signal light -
good signal
• All three signal lights (green on top) - excellent
signal; Hubs may be too close together
Using the Hub
6
The AyrMesh Hub provides normal 802.11n
WiFi, just like any other WiFi access point.
Unless you have changed it in your
AyrMesh.com account, the default SSID is
"AyrMesh" and the default encryption passkey is
"Ayrmesh1" (note the capital "A").
NOTE: Once you have tested the Hubs, MAKE
SURE you CHANGE THE ENCRYPTION
PASSKEY(and the SSID ifyou want) in your
AyrMesh.com account to ensure the security of
your network!
Changes on AyrMesh.com may take up to half
an hour to take effect on your network - the
Hubs wait before changing to make sure all the
devices in the network receive the new
configuration.
The AyrMesh network extends the IP network
ofyour router, so, from a networking
perpsective, everything connected to the
AyrMesh network appears as ifconnected
directly to your router.
Select AyrMesh network (default:
AyrMesh
)
Enter the passkey (default:
Ayrmesh1
)
