Ayre KX-5, Руководство пользователя

Страница: 11 / 40

Re-Entering Basic Setup Mode
You may re-enter the basic setup mode to make
changes to the names of inputs. Make sure that the
amplifier is in the system-sleep state (right-hand
pushbutton lit green—please refer to the chapter
“Controls and Operation” for additional
information). Then press and hold the left-hand
button for three seconds. The front panel will then
display “
SET UP
” briefly, and then“
XXX 1
” where
“XXX” is the name assigned to input 1.
Advanced users may wish to use additional
sophisticated input configuration options, including
the creation of custom names for source
components. Please refer to the chapter
“Optimization and Customization” for further
details on using the advanced setup mode.
Break-In
100 to 500 hours of music
played through the system will
ensure full break-in.
Due to the manufacturing processes used for the
wires, capacitors, and circuit board materials, a
break-in period is necessary for the amplifier to
reach its full sonic potential.
Each input uses a different physical path on the
input circuit board. Therefore a separate break-in
period is required for each input.
9
XXX 1
SET UP